Страница 1 из 1

[b]Alfa .ecu files[/b]

СообщениеДобавлено: Ср сен 21, 2005 1:00 pm
turbi nitronen
Hi Guys can somebody help me for finding a kind of source for some .ecu files for alfa romeo ECU chips

i have the PROM burner and some intersting progrmas for chip mapping

thanx

СообщениеДобавлено: Ср сен 21, 2005 5:28 pm
debaucheer
at 1st u`d better said which motor u r interested in, `n` in 2nd i think nobody here can help u with this.. perhaps alfabb.com will help?

Motor

СообщениеДобавлено: Ср сен 21, 2005 11:53 pm
turbi nitronen
the motor actually is 1.8 TS 8v produced on 23d november 1992

the engine system is bosch motronic m1.7 - the chip #- 27C256

it is ok to pot on russian. i have problems writin on it m, but i understand it perfect

СообщениеДобавлено: Чт сен 22, 2005 9:47 am
FreeLSD
debauchee писал(а):at 1st u`d better said which motor u r interested in, `n` in 2nd i think nobody here can help u with this.. perhaps alfabb.com will help?


Не говори за всех.

СообщениеДобавлено: Чт сен 22, 2005 2:27 pm
BoostBuster
debauchee писал(а):at 1st u`d better said which motor u r interested in, `n` in 2nd i think nobody here can help u with this.. perhaps alfabb.com will help?


Hey maaaan! I don't think so! FYI about alfabb.com - thats real shit place, trust me ;)

Re: [b]Alfa .ecu files[/b]

СообщениеДобавлено: Чт сен 22, 2005 2:36 pm
BoostBuster
turbi nitronen писал(а):Hi Guys can somebody help me for finding a kind of source for some .ecu files for alfa romeo ECU chips

i have the PROM burner and some intersting progrmas for chip mapping

thanx


Ok, i will try to help you. I have a binaries ROM images from these ECUs. And some info about fuel and ignition tables placement. Unfortunaly, i do not have source code, only disassembled binaries. Ok, if you have any questions - you are wellcome ;).

СообщениеДобавлено: Чт сен 22, 2005 2:39 pm
FreeLSD
turbi nitronen по русски понимает отлично. Просто писать не может.

Роман, а чем alfabb.com тебе не угодила?

Roman_AR155 писал(а):Hey maaaan!

Это из фильма "Don't be menace to South Central" ? =)
Чорный бродяга писал(а):Чувааак! У тебя мелочь есть?

:D :D :D

СообщениеДобавлено: Чт сен 22, 2005 5:14 pm
debaucheer
FreeLSD писал(а):
debauchee писал(а):at 1st u`d better said which motor u r interested in, `n` in 2nd i think nobody here can help u with this.. perhaps alfabb.com will help?


Не говори за всех.


во первых я не говорил-а сказал что только так думаю :wink:
а во вторых, я ж не знал что по-русски он понимает, раз на англ написал :D

Re: [b]Alfa .ecu files[/b]

СообщениеДобавлено: Пт сен 23, 2005 5:10 pm
turbi nitronen
Roman_AR155 писал(а):
turbi nitronen писал(а):Hi Guys can somebody help me for finding a kind of source for some .ecu files for alfa romeo ECU chips

i have the PROM burner and some intersting progrmas for chip mapping

thanx


Ok, i will try to help you. I have a binaries ROM images from these ECUs. And some info about fuel and ignition tables placement. Unfortunaly, i do not have source code, only disassembled binaries. Ok, if you have any questions - you are wellcome ;).



ok, thanx a lot, i can give some progs for assambling/ binary code and some other thinks. i am not sure that they will work properly , but i belive that iMUSt to try:) so if u are interested... please let me know

:)